Design and manufacture of agricultural and industrial equipment
Menu
Menu
Injection tool with roller
Injection tool with roller
There are different Jaulent buriers, adapted according to the needs and demands of its customers.
All the technical data is referenced in the performance table below.
Performance table | |||||||
MEASURE | |||||||
Designation | REF. | Length | Width | Height | Weight | Performance | Picture |
Heavy Injection tools, cast iron model | ENFL | 0,45 m | 0,08 m | 0,82 m | 40 Kg |
Unfolds from flat or round duct | view PDF |
Injection tools cast iron | ENF | 0,27 m | 0,07 m | 0,50 m | 8Kg | Unwinding of the flat sheath manual height and depth adjustment Adaptable to all machines | view PDF |
Injection tool with roller with cover plate | ENFGA | 0,60 m | 0,35 m | 0,70 m | 15 Kg | Unwinding of the flat sheath manual height and depth adjustment Adaptable to all machines Rear plate to cover the furrow Roller to avoid damaging the sheath | view PDF |
Injection tool with roller with long sheath guide with buffer | ENFGB | 1,30 m | 0,80 m | 0,85 m | 97 Kg | Unwinding of the flat sheath manual height and depth adjustment Adaptable to all machines Creates mounds of 20 wide and 20 high | view PDF |
Injection tool with parallelogram and height skate | ENFPPP | 0,95 m | 0,25 m | 0,75 m | 33 Kg | Unwinding of the flat sheath Manual height and depth adjustment Adaptable to all machines | view PDF |
3-point hitching beam for Drip tape installation machine. Category 1 and 2 | PATC1/2 | 1,70 m | 1,10 m | 1,10 m | 85 Kg | Allows reels to be attached to a beam for hitching to the rear of a tractor. | view PDF |