Decompactor 7 and 9 teeth

The 7 and 9-tooth folding decompactor with road gauge
Double V parallel frame made of high quality steel tube with a large cross-section allowing a good distribution of the forces on each of the beams.
Third point triangle and non-deformable tubular counter plug.
The blade supports are made of high resistance steel. These have a judiciously studied shape to allow the most agronomic work possible, less clods, low absorbed power as well as a very good penetration in the ground.
No surface disturbance, no rotation or inertia of the clods, simply cracking and lifting of the soil.
The blades are protected over their entire surface by abrasion-resistant steel wear parts.
Each blade is secured by a shear bolt that breaks at 28 tons, allowing work to be carried out in the most difficult conditions.
The shares are made of forged and hardened steel.
The Packer roller ensures soil compaction and load transfer to the front axle covering the entire working width.
They are mounted on double Timken® bearings that react to vertical and lateral forces, allowing you to work on slopes. This allows you to work in optimal conditions. In addition, the roller allows the load to be transferred to the front axle, thus ensuring perfect transmission of power to all four wheels. The depth adjustment can be done by screw jack or by hydraulic jack.

Technical specifications:

⦁ Interchangeable pshares.
⦁ Working depth = 60cm.
⦁ Clearance under frame = 0,80cm